Hanson Formpave Aquaflow block

Permeable paving for use on car parks, drives and moderately trafficked areas
'Formpave have designed a range of Aquaflow paving blocks to be used in conjunction with either tanked or infiltration systems.

The range is manufactured from concrete with a tensile splitting strength in accordance with BS EN 1338:2003.

All of the blocks and slabs provide drainage through vertical channels and will allow water through the surface at a rate of approximately 9000mm per hour (9000 litres per m2 per hour). The Inbitex geotextile beneath the laying course will allow approximately 4500 litres per m2 per hour through and this figure should be used for design purposes.

Size: 100 x 200 x 60/80mm
Laying pattern: Must be laid in 90o herringbone
Colours: Natural, Burnt Red, Red brindle, Golden brindle and Charcoal.
Finish: Standard and Bush hammered to special order

NB the Aquaflow range includes Cornish 'EcoGranite' of whose materials 70% are recycled'
  • Hanson Formpave Aquaflow block (image 1)
  • Hanson Formpave Aquaflow block (image 2)
  • Hanson Formpave Aquaflow block (image 3)
  • Hanson Formpave Aquaflow block (image 4)
  • Hanson Formpave Aquaflow block (image 5)

Environmental metrics


Company credentials
BS EN ISO 14001 BSI

Material(s)
Cement, limestone aggregates and GGBS

Life expectancy
up to 20 years

EPD to ISO 14025
none

Recycled content
1

Recycleable
reusable and recyclable

3rd party product endorsement
none

Environmental labelling
none

Country of manufacture
UK

Manufacture details

Manufacturer
Hanson Building Products, t/a Hanson Formpave



Address
Tufthorn Avenue, Coleford, Gloucestershire

Telephone
01594 836999

Fax
01594 810577

Comments (moderated)

Sign in or create your GreenSpec account to join the discussion.