Colas 'Repave'

Surface course material for asphalt paving

‘A pavement, although sound, can sometimes show signs of deformation or surface fretting. In such a situation, Repave provides a faster, more cost effective alternative to traditional forms of surfacing. The process allows flexibility of programming - the heat from Repave penetrates deep into the road material allowing work to take place at virtually any time of year.

The existing road surface is heated to 150º C and scarified to a depth of 30mm using a two-stage scarifier with spring loaded tines to avoid damage to street furniture. Next an oscillating, floating screed reprofiles and corrects levels for the required crown or crossfall.

The process is completed by the immediate application of either a 25mm bituminous wearing course, hot rolled asphalt with 20mm pre-coated chippings, high stone content asphalt or a proprietary thin surfacing. The heat from the Repave machine welds the new materials removing the need for a tack coat.

Repave complies with Department of Transport Specification for Highway Works Clause 926’

Material/s: bitumen: aggregates (3%: 97%)
Environmental statement: no
BRE Ecopoints: unrated
Green Guide rating: unrated
Environmental certification: ISO 14001
3rd party accreditation: none
3rd party product endorsement: none
Quality certification: ISO 9001:2000
Reusability / Recyclability: recyclable
Recycled content to ISO 14021: 50% recycled aggregate
Life expectancy unknown
Substitute for or new
materials / method:
conventional hot rolled asphalt surface course materials
Downloads:
Codes of Practice:
Workmanship Work Section:
Country/s of manufacture: in situ
UK distribution location: in situ
Alternative products: Road surfacing
Further information:
Information last updated: Tuesday 29th, April 2008
Manufacturer's evidence rating:*
Manufacturer
Manufacturer: Colas
Address: Cakemore Road, Rowley Regis, West Midlands B65 0QU
Telephone: 0121 561 5561
Fax: 01342 711199
Email: info@colas.co.uk
Website: www.colas.co.uk
Suppliers
Supply chain availability: Service 

Supplier: Contracting service by Colas
Telephone: 0121 561 5561
Email: info@colas.co.uk
Website: http://www.colas.co.uk

The product has been selected on the above average performance in the following areas:

- Abiotic depletion - Acidification
- Global warming - Eutrophication
- Ozone layer deplection Yes Solid Waste
- Human toxicity - Radioactivity
- Fresh water aquatic ecotoxicity - Minerals extraction
- Terrestial exotoxicity - Water extraction
- Photochemical oxidation    

 

*Note:
Manufacturer's evidence rating
* One star rating: The product has been included based on an assessment of the manufacturer's own product information.
*** Three star rating: The product has been included on the basis of a third party, independent, Life Cycle Analysis (BRE Ecoprofile or similar).