Pavatex NBT Steel Frame Pavaclad System

fibreboard insulation system for steel frame construction with cladding

'Pavatex NBT Steel Frame Pavaclad System is for light steel buildings externally finished with any type of cladding including facing bricks, rendered blockwork, timber boards or shingles, tile, terracotta claddings, metal sheet etc.

Pavaclad systems use Pavatex woodfibre boards over the outside of the frame in a continuous layer to give an unbridged thermal shell, with excellent breathability and acoustic insulation. The airtightness layer is on the inside of the frame and it is optional whether to install a service void on the inside of this layer for easy service alterations.

System benefits

• Excellent thermal performance, with very low thermal bridging, enabling very slim construction for new Part L compliance
• Alternatively very high thermal shell performance possible in slim and cost effective way
• Excellent airtightness by design
• Excellent acoustic insulation
• Good overheating control
• Fully breathing construction
• Full design and site support from Burdens Environmental
• Full systems parts from Burdens Environmental
• Tried and tested system, fully certified

Full system components

Insulation boards:
Interlocking, waterproof Isolair boards (22, 35mm) and Pavatherm Plus boards (60, 80, 100mm), and square edged backing insulation Pavatherm boards (20 to 100mm).

Fixings, tapes and papers:
A range of specialist screw fixings for different board thicknesses and claddings. Pavatape for exposed edges, and a selection of airtightness papers and tapes.

Infill insulation:
NBT provide natural insulation materials such as Hemp Cotton, Sheepswool and Cellulose.

Plaster boards and paints:
NBT Environmental can provide clay boards, plasters and trade environmental paints for internal walls.

Steel frames:
NBT Environmental do not provide steel frames, but work with manufacturers to ensure correct designs.'

Material/s: wood fibre and paraffin boards, mineral render, natural insulation, plasterboard
Environmental statement: yes
BRE Ecopoints: Pavatex: 4.7 (cradle to grave), -0.33 (cradle to gate)
Green Guide rating: Pavatex: 'A' rated using 89mm stud full filled with cellulose insulation with 22mm NBT Pavatex insulated sarking board (Isolair 240 kg/m3) and timber cladding.
Environmental certification: Pavatex: ISO 14001; Natureplus;
3rd party accreditation: Pavatex: CE Mark
3rd party product endorsement: Pavatex: FSC certified
Quality certification: Pavatex: ISO 9001
Reusability / Recyclability: recyclable & reusable
Recycled content to ISO 14021: Pavatex: 99.5% waste wood from local forest / timber yards
Life expectancy life of building
Substitute for or new
materials / method:
insulation from non-renewable sources
Downloads: Technical data
Codes of Practice:
Workmanship Work Section:
Country/s of manufacture: Pavatex: Switzerland, transported by road to UK
UK distribution location: Buckinghamshire
Alternative products: Insulation materials
Further information: Insulation materials compared
Information last updated: Sunday 28th, September 2008
Manufacturer's evidence rating:*
Manufacturer
Manufacturer: Pavatex NBT
Address: c/o Natural Building Technologies, The Hangar, Worminghall Road, Oakley, Bucks, HP18 9UL
Telephone: 01844 338 338
Fax: 01844 338 525
Email: info@natural-building.co.uk
Website: www.natural-building.co.uk
Get pricing and delivery information for this product   Click Here

The product has been selected on the above average performance in the following areas:

- Abiotic depletion - Acidification
Yes Global warming - Eutrophication
- Ozone layer deplection Yes Solid Waste
- Human toxicity - Radioactivity
- Fresh water aquatic ecotoxicity Yes Minerals extraction
- Terrestial exotoxicity - Water extraction
- Photochemical oxidation    

 

*Note:
Manufacturer's evidence rating
* One star rating: The product has been included based on an assessment of the manufacturer's own product information.
*** Three star rating: The product has been included on the basis of a third party, independent, Life Cycle Analysis (BRE Ecoprofile or similar).