Foamglas ‘Perinsul SL’
thermal insulation of structural floors/rafts - new build or renovation
‘FOAMGLAS® PERINSUL® SL is an innovative product developed by PITTSBURGH CORNING to eliminate thermal bridges at joints within wall constructions. FOAMGLAS® PERINSUL® SL blocks, manufactured from FOAMGLAS®, are designed to form an effective insulated joint between vertical wall insulation and horizontal floor or roof insulation. Possessing all the thermal properties for which FOAMGLAS® is well proven, together with the exceptionally high compressive strength of FOAMGLAS®, cold bridging is eliminated and structural integrity maintained.
Applications:
FOAMGLAS® PERINSUL® SL has a compressive strength of 3000 kN/m2 and, when a safety factor of 3 is used, it has a load bearing capacity of 1 N/mm2 without compression or deformation. It can therefore be installed at the base of structural walls in the following situations:
• inner walls (block or brick)
• outer walls (block or brick)
• parapets
• access points
• support areas for roof trusses’
| Material/s: | recycled, post consumer waste, silica, sand and elements of glass production. Recycled and new glass with mixed carbon. |
| Environmental statement: | yes |
| BRE Ecopoints: | unrated |
| Green Guide rating: | unrated |
| Environmental certification: | EPD to EN14041 conforms to NF P 01-010 |
| 3rd party accreditation: | none |
| 3rd party product endorsement: | none |
| Quality certification: | ISO 9001:2000 |
| Reusability / Recyclability: | reusable |
| Recycled content to ISO 14021: | 66% waste glass includes own production waste |
| Life expectancy | 100 years, subject to conditions |
| Substitute for or new materials / method: |
petrochemical-based insulation |
| Downloads: | Product brochure |
| Codes of Practice: | |
| Workmanship Work Section: | |
| Country/s of manufacture: | Europe |
| UK distribution location: | Berkshire |
| Alternative products: | Thermal insulation |
| Further information: | Insulation materials compared |
| Information last updated: | Wednesday 30th, April 2008 |
| Manufacturer's evidence rating:* |  |
| Manufacturer: | Pittsburgh Corning (UK) Ltd |
| Address: | 63 Milford Road, Reading, Berkshire, RG1 8LG |
| Telephone: | 0118 950 0655 |
| Fax: | 0118 950 9019 |
| Email: | info@foamglass.co.uk |
| Website: | www.foamglas.co.uk |
| Supply chain availability: | Manufacturer |
| Supplier: | Pittsburgh Corning (UK) Ltd |
| Telephone: | 0118 950 0655 |
| Email: | info@foamglas.co.uk |
| Website: | http://www.foamglas.co.uk/building.htm |
The product has been selected on the above average performance in the following areas:
| - | Abiotic depletion | - | Acidification |
 |
Global warming | - | Eutrophication |
| - | Ozone layer deplection | |
Solid Waste |
| - | Human toxicity | - | Radioactivity |
| - | Fresh water aquatic ecotoxicity | - | Minerals extraction |
| - | Terrestial exotoxicity | - | Water extraction |
| - | Photochemical oxidation |
*Note:
Manufacturer's evidence rating
* One star rating: The product has been included based on an assessment of the manufacturer's own product information.
*** Three star rating: The product has been included on the basis of a third party, independent, Life Cycle Analysis (BRE Ecoprofile or similar).
