Isowool ‘Cavity Wall System (CWS)’

Thermal insulation for cavity walls

‘Isowool CWS is designed to be installed during construction in the cavity between two masonry leaves in external walls.

The slabs can be used either to fully fill the cavity, or alternatively, as a partial cavity fill when held against the outer face of the inner leaf in conjunction with a minimum 25mm residual cavity.

Isowool CWS is a non-combustible, silicone-impregnated glass mineral wool slab, supplied in a variety of thicknesses, in1200mm x 455mm dimension compatible with conventional wall tie spacing.

The product is composed of high quality, glass wool, which is bonded with a synthetic, thermo-setting resin, silicone impregnated, to form a strong yet resilient insulating slab, which is easy to handle, cut and install.’

Material/s: glass mineral wool with recycled content
Environmental statement: yes
BRE Ecopoints: unrated
Green Guide rating: unrated
Environmental certification: none
3rd party accreditation: BBA cert 90/2465
3rd party product endorsement: none
Quality certification: ISO 9001
Reusability / Recyclability: reusable
Recycled content to ISO 14021: 70% recycled glass
Life expectancy lifetime of the building
Substitute for or new
materials / method:
virgin glass fibre
Downloads: Product brochure
Codes of Practice:
Workmanship Work Section:
Country/s of manufacture: UK
UK distribution location: Chesire
Alternative products: Insulation materials
Further information: Insulation materials compared
Information last updated: Thursday 1st, May 2008
Manufacturer's evidence rating:*
Manufacturer
Manufacturer: Isover
Address: Technical Services, East Leake, Loughborough, LE12 6JT
Telephone: 0115 945 1143
Fax: 0115 945 1915
Email: isover.enquiries@saint-gobain.com
Website: www.isover.co.uk/
Suppliers
Supply chain availability: Distributors & installers 

Supplier: Refer to manufacturer's listings
Telephone: 0115 945 1050
Email: isover.enquiries@saint-gobain.com
Website: http://www.isover.co.uk/stockists_installers.asp

The product has been selected on the above average performance in the following areas:

- Abiotic depletion - Acidification
Yes Global warming - Eutrophication
- Ozone layer deplection Yes Solid Waste
- Human toxicity - Radioactivity
- Fresh water aquatic ecotoxicity - Minerals extraction
- Terrestial exotoxicity - Water extraction
- Photochemical oxidation    

 

*Note:
Manufacturer's evidence rating
* One star rating: The product has been included based on an assessment of the manufacturer's own product information.
*** Three star rating: The product has been included on the basis of a third party, independent, Life Cycle Analysis (BRE Ecoprofile or similar).